Ventilation

NOVELTIES OF SMOKE EXTRACTION

novinki_dymoudaleniya_ru.jpg

     

The catalog provides information on smoke hatches L-K, control cabinets of smoke hatches SHTORM-L-K, fire dampers GMK-DU.

The smoke hatch L-K is designed to cover the openings in the exterior wall envelopes, protected by exhaust smoke ventilation with a natural draft of the rodding.

The control cabinets of smoke hatches SHTORM-L-K in case of fire and for controlled by self ventilation.

Fire dampers GMK-DU – multiple vane fire damper without deflection of the blades beyond the dimensions of the housing.

 

skachat_katalog_pdf.png

Catalog 27.1 Mb (Russian)

       

Updated 07.04.2018

             

JET FANS

cover_struynyye_ventilyatory.jpg       Jet fans are designed for forced ventilation and removal of combustion products in case of a fire, from closed and underground parking lots, and garage spaces.

The jet fan JF-DU takes up little space and simply throw the air horizontally for arrange airflow. In turn, the jet fan JF-DU takes air from the lower space.
 

skachat_katalog_pdf.png

Catalog 4.6 Mb (Russian)

         Updated 14.05.2018
             

 FANS OF GENERAL AND SPECIAL PURPOSE

 cover_radial_fan.jpg      

Fans of general and special purpose are designed for moving gas-air flows of industrial, commercial and public buildings.

The catalog contains information of the radial fans VRAN, VRAV series, radial compact fans RAV, RAF series, dust fans DUF series, radial roof fans KROS, KROV, KROM, axial fan OZA-R series.

It is also in the catalog the information about the additional equipment for general industrial fans and automation systems for fan control.

 

skachat_katalog_pdf.png

Catalog 18 Mb (Russian)

  Updated 31.08.2017
 

ROOF HOODS OF VENTILATION

ventilation_roof_hoods_ccktm.jpg

     

Roof hoods are designed for effective ventilation of all engineering systems of the house.

Catalogue of roof ventilation hoods includes: roof hoods of the series D, DU, Z, EZ, EZB, ZL, BZL, RD, RDU, RZL, PVZ; roof transition series SP and SPD; roof transition connection piece, upper series SP-NR, SP-ZL; roof transition connection piece, inner SP-VN.

Roof hoods can be installed on the roofs of buildings of any purpose: residential, public, administrative, industrial, agricultural, warehousing and others.




 

skachat_katalog_pdf.png

Catalog 3.5 Mb (English)

       

 Updated 15.03.2017

             

AXIAL FANS OZA 300, OZA 301 AND HIGH-PRESSURE FANS OZA-F 300, OZA-F 301

katalog_cck_tm_osevyye_ventilyatory_ukr.jpg       Axial fans OZA 300 and OZA 301 are unified range. This fans provide compactness, ease of design and installation and full efficiency of 75%.

High-pressure axial fans OZA-F 300 and OZA-F 301 designed for use in ventilation systems, air heating, sanitary and technological installations, systems, smoke ventilation diffuser. This series has a higher pressure develops.
 

skachat_katalog_pdf.png

Catalog 13.6 Mb (Ukrainian)

Updated 07.04.2017
 

DUCT AIR HANDLING UNITS

kanal_katalog_cck_tm_ukr.jpg       The components of ventilation duct units allow you to create compact economical solutions for stationary ventilation and air conditioning.
The catalog includes a number of key components: rectangular, round and square duct fans, duct, water and electric heaters duct units, water and freon coolers, ducted heat exchanger, filters and silencers, unified air and reverse petal dampers, blind grille and flexible connectors.
Number of duct units is supplemented with automatic control, mixing unit for water heat exchangers, speed controller, frequency converters and temperature sensors of duct fans.
EXTENDED RANGE OF EQUIPMENT FOR DUCT FAN.
 

skachat_katalog_pdf.png
  Catalog 20.9 Мb
(Ukrainian)

        Updated 31.08.2017
             

DUCT AXIAL FANS C-OZA

 
c_oza_katalog_cck_tm_en.jpg       Duct axial fan C-OZA-N have been developed for installation in the supply and exhaust air system.
Duct axial fan C-OZA-S have been developed for installation in the supply and exhaust air system for building and objects with high requirements to the noise.
Duct axial fan C-OZA-T is have been developed for installation in the supply and exhaust air system.
Duct axial fan C-OZA-Cis have been developed to be mounted directly to the wall.
Duct axial fan C-OZA-P is have been developed to be mounted directly to the wall using a special square plate.
There was presented the equipment for a complete set of duct axial fan series C-OZA.
  skachat_katalog_pdf.png
Catalog 2.1 Мb
(English)
        Updated 05.04.2016
       

DAMPERS AND AIR DISTRIBUTION PRODUCTS

setel_blok_katalog_cck_tm.jpg      
Air distribution products comprise a wide range of standardized and warmed kinematics dampers, special purpose dampers, back pressure dampers and air balancing dampers, adjustment air dampers, grilles. The general purpose dampers include dampers REG, REG-L, RLN, GMK-P, GMK, GMK-R, TUL, KLR, КОL.
The specialized purpose of air distribution products includes dampers GMK-Т, GMKх2, KED, NER, NER-КО.
  skachat_katalog_pdf.png
Catalog 13.8 Мб
(Russian)
        Updated 24.05.2018

SMOKE EXTRACT FANS

oborudovaniye_protivopozharnoy_ventilyatsii.jpg       Fans for smoke exhaust ventilation systems are designed to remove gases arising from fire and heat dissipation from the served room or building. Smoke exhaust ventilation systems are designed to work on fire-fighting and evacuation. Fans can move gases with temperatures up to 400 °C or 600 °C for at least 120 minutes. These include fans UKROS-DU/DUV, KROV-DU/DUV, VRAN-DU/DUV, VNR-DU/DUV, AF-DU/DUV.
Smoke fans for air supply ventilation systems installed in special smoke air handling systems for overpressure in the lobbies, gateways and elevator shafts of buildings to prevent the entry of smoke in these premises and providing conditions for work on fire-fighting and evacuation. These include fans OZA 201, OZA 501, VKOP 0, VKOP 1, VKOP 2.
The catalog also contains complete information about optional equipment of smoke fans.
  skachat_katalog_pdf.png
Catalog 66.3 Mb
(Russian)
        Updated 17.04.2018
         

FIRE DAMPERS

klapany_protivopozharnyye_katalog_ccktm_ukr.jpg       Fire dampers are designed for installation in the openings walling smoke channels in the smoke exhaust system with floor corridors, lobbies on escape ways in residential, public, administrative and household and industrial high-rise buildings in accordance with the standards and requirements of the current regulatory documents. These include dampers KPU-1N, KPD-4.  

skachat_katalog_pdf.png
Catalog 16.8 Mb

(Russian)

        Updated 27.04.2018

LANG_CALLBACK_HEADER